Make sure the second row seats are in their furthest forward position.

Open Tailgate.

Remove the parcel shelf from the vehicle.

Remove the bolt and the fixed D-loop anchor point as illustrated. Complete this step for both anchor points, located on either side of the loadspace.

Install both brackets (B) and (C) to half height loadspace (A) with 4 bolts (H) as illustrated.

• Torque: 12 Nm

Attach the bracket (D) to the loadspace floor using bolt (G), as illustrated. Complete this step for both anchor points, located on either side of the loadspace.

• Torque: 24 Nm

Reattach the fixed D-loop anchor point as illustrated. Complete this step for both anchor points, located on either side of the loadspace.

• Torque: 24 Nm

Fold down the second row seats.

Place the half height loadspace partition into the vehicle interior.

Secure the half height loadspace partition to the left side of the vehicle as illustrated.

1. Locate the sprung pin into the larger of the two holes in the roof fixing point.
2. Slide the sprung pin up and over the ridge so it locates into the smaller of the two holes in the roof fixing point. The sprung pin will secure the half height loadspace partition within the roof fixing point
3. Repeat the above steps to secure the half height loadspace partition to the roof fixing point on the right side of the vehicle.

Loosely secure the half height loadspace partition to the anchor point on the left side of the vehicle using the thumbscrew (E). Repeat this step for the anchor point located on the right side of the vehicle.

Return the second row seats to their upright position. Make sure the seat backrest does not touch the half height loadspace partition.

Tighten the 2 thumbscrews (E) to secure the half height loadspace partition to the 2 anchor points.

Make sure the half height loadspace partition is positioned correctly within the loadspace and all thumbscrews are tightened.