• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER VELAR

LOADSPACE SIDE NET

VPLYS0418

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
Fitting Instruction
1

Open the tailgate.

2

Remove the parcel shelf from the vehicle.

3

Attach the 2 base clips (C) onto the loadspace side net as illustrated.

4

Position the loadspace side net at the installation position. Mark the locations where the 2 holes need to be drilled. These holes will be used to locate the 2 clips (C) that will support the base of the loadspace side net.

5
CAUTION
  • Do not exceed a depth of 10 mm.

Drill a 10 mm hole at the previously marked locations.

6

Insert the 2 clips (C) into the holes as illustrated. Make sure that the open section of the clip faces towards you.

7

Attach the loadspace side net to the 2 base clips (C).

8
NOTE
  • Make sure the distance from the top of the loadspace side net to the back of the loadspace recess is 110 mm.

Mark the locations where the 2 holes need to be drilled as illustrated. These holes will be used to locate the 2 clips (B) that will support the top of the loadspace side net.

9

Remove the loadspace side net.

10
CAUTION
  • Do not exceed a depth of 10 mm.

Drill a 10 mm hole at the previously marked locations.

11

Insert the 2 clips (B) into the drilled holes on both sides of the loadspace recess.

12

Attach the loadspace side net to the 2 top clips (B).

  1. Insert the hook on the upper left side of the loadspace side net into the clip.
  2. Insert the hook on the upper right side of the loadspace side net into the clip.
13

Attach the loadspace side net to the 2 base clips (C).

14

Replace the parcel shelf into the vehicle.

15

Close the tailgate.

© Land Rover 2016