• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER VELAR

CLIP-ON WINDOW SIDE BLINDS - SECOND ROW

VPLYS0426

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
NOTE
  • Left side illustrations shown, right side is similar.
Fitting Instruction
1
NOTE
  • Clip-on window side blinds must be fitted in the correct orientation.

Place two clips (C) onto each of the clip-on window side blinds (A), as illustrated.

2
NOTE
  • Clip-on window side blinds must be fitted in the correct orientation.

Place two clips (C) onto each of the clip-on window side blinds (B), as illustrated.

3

Position the clip-on window side blind (B) onto the rear quarter window, as illustrated. Push the two clips (C) into the groove in the interior trim around the rear quarter window.

4

Open the second row door.

5

Partially lower the second row window.

6

Position the clip-on window side blind (A) onto the second row window, as illustrated.

  1. Lower the clip-on window side blind into position against the base of the second row window.
  2. Push the two clips (C) into the groove in the interior trim at the top of the second row window.
7

Raise the second row window.

8

To remove the clip-on window side blind from the rear quarter window, pull down on the tab located near the top of the clip-on window side blind.

9

To remove the clip-on window side blind from the second row door window, pull down on the tab located at the top of the clip-on window side blind.

10

Close the second row door.

© Land Rover 2016