Determine if the cycle carrier will be mounted on the left or right side of the vehicle. If the carrier is to be mounted on the left side then follow substeps 1 to 4 below then continue at step 2. If the cycle carrier will be mounted on the right side of the vehicle, start at step 2.

1. Remove the five parts as illustrated.
2. Loosen the bolts to release the claw and control handle. Rotate this part by 180°.
3. Tighten the bolts to attach the claw and control handle back onto the carrier and then rotate the claw to face the rear of the vehicle.
4. Replace each part onto the cycle carrier as illustrated.

If the cycle carrier will be mounted on a square roof cross bar, start at step 4.

If the cycle carrier will be mounted on a T-track roof cross bar, start at step 13.

Assemble the roof cross bar locking handle (F) to the rear cycle carrier bracket.

Attach the wheel straps to both ends of the cycle carrier.

• Make sure the strap orientation is correct.
• Make sure the strap button is not locked.

Follow substeps 1 to 5 below to attach the cycle carrier to the roof cross bars.

1. Guide part H beneath the roof cross bar.
2. Attach part H to the stem of the locking handle.
3. Raise up the locking handles as illustrated.
4. Rotate the roof cross bar locking handles to tighten.
5. Push down the handles to secure the cycle carrier to the roof cross bars.

Using the key, lock the front roof cross bar locking handle. Continue at step 21.

Assemble the roof cross bar locking handles (E and F).

Assemble the roof cross bar locking handle (F) to the rear cycle carrier bracket.

Attach the wheel straps to both ends of the cycle carrier.

1. Make sure the strap orientation is correct.
2. Make sure the strap button is not locked.

Slide the cycle carrier to the required position. Rotate the roof cross bar locking handles to tighten and then push down the handles to secure the cycle carrier to the roof cross bars.

1. Slide the cycle carrier to the required position.
2. Rotate the roof cross bar locking handles to tighten
3. Push down the roof cross bar locking handles to secure the cycle carrier to the roof cross bars.

For both roof cross bar variants, continue at step 21.

Lift the cycle onto the cycle carrier. The cycle frame should engage into the claw.

Turn clockwise the button on the claw control handle until the clicking sound stops.

1. Tighten both the front and rear wheel straps, making sure the strap is an equal length on either side of the wheel.
2. Press down the locking button on each strap.

For removal of a cycle, release both the wheel straps.

Press the button on the claw control handle to loosen the claw. Make sure the cycle is being supported as the claw is released. Lift the cycle clear of the cycle carrier.

The cycle carrier can be removed from the vehicle as a single item. Release the locking handles at the front of the cycle carrier.

1. Using the key, unlock the roof cross bar locking handle. Lift the locking handles and rotate to loosen.
2. Detach part H and rotate away from the stem of the locking handle.

Lift or slide the cycle carrier from the vehicle.