LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER VELAR

AQUA SPORTS CARRIER

VPLWR0099

FITTING INSTRUCTION

WARNING
  • Do not exceed 130 Km/h (80mp/h).
  • The maximum load should not exceed 45 Kg.
  • Make sure the load is level.
  • Make sure the load is equally distributed and has no excessive overhang at the front or rear of the vehicle. Any overhang at the rear of the vehicle requires a warning flag.
  • Make sure the tailgate does not clash with the load.
  • Secure the load at each end.
  • Be aware of the increased height of the vehicle.
  • Do not use an automated car wash with the carrier installed.
WARNING
  • Do not carry more that two kayaks.
Fitting Instruction
1

Unlock and remove the cross bar end caps.

2

Slide out both of the trims from the roof bars.

3

  1. Using a suitable cutting tool, cut the roof bar trims using the measurements illustrated.
  2. Discard the smallest section of roof bar trim.
4

  1. Insert the roof bar trim and the fixing 'B' into the roof bar as illustrated.
  2. Install and lock roof bar end cap.
5

Assemble the carrier as illustrated.

6

Lower the carrier onto the roof bar.

7

Repeat steps 4 to 6 for the other carrier.

8

Using the straps supplied, secure the load.

9

Folding the carrier.

  1. Unscrew the fixings.
  2. Fold down the carrier.
  3. Tighten the fixings.
10
WARNING
  • Do not exceed 130 km/h or 80 mph.

© Land Rover 2016