Open the tailgate.

Move second row seats to there most forward position and fold down seats. See Owners's Handbook.

If applicable to your vehicle fold down the third row seats. See Owners's Handbook.

Use a suitable trim tool to remove the loadspace partition mounting slot covers on both sides of the vehicle.

1. Insert the trim tool into the cutout.
2. Open the loadspace partition mounting slot cover.
3. Store covers securely.

Maneuver loadspace partition net (A) into vehicle from the rear side door.

Install the loadspace partition net fasteners into the loadspace partition mounting slots on both sides of the vehicle.

1. Raise the loadspace partition net so the pin is aligned with the larger circular slot as illustrated.
2. Carefully raise the loadspace partition net pin into the larger circular slot. The top part of the pin will engage into the smaller circular slot when moved forward.

Locate positions of the D-loops on your vehicle. There is a difference in location if your vehicle is 5 or 8 seat.

Secure the Loadspace Partition Net straps to the vehicles D-loops.

1. Feed the Loadspace Partition Net strap down to and through the D-loop.
2. Feed the Loadspace Partition Net strap up to and through the ratchet buckle while keeping the strap tight.
3. When you are happy with the tightness of the strap. You can feed the remaining strap through the elastic holder.

Fold up second row seats. If you are to have your second row seats in the reclined position then position your seat first before tightening the 'Loadspace Partition Net'.

Inspect that the 'Loadspace Partition Net' is secure and all straps are tight and straight and not twisted.