• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DEFENDER

CLICK & PLAY TABLET HOLDER

T4K17568 / T4K17569 / T4K17570 / T4K17571 / VPLKE0061 / VPLKE0062 / VPLKE0063 / VPLKE0064

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. when fitting, comply with instructions at all times. If in doubt, contact your nearest approved retailer.
CAUTION
  • Take suitable care not to damage the Click and Play Tablet Holder if the rear seats are folded down or when adjusting the headrest position.
  • A protective film must be fitted to the tablet before installing it to the Click and Play Tablet Holder.
  • When not in use the Click and Play Tablet Holder should be stored in the luggage compartment.
  • Click and Play Tablet Holder only to be used in vehicle when fitted with the Click and Play Protective Case.
NOTE
  • The Click and Play Tablet Holder is to be used with the Click and Go System Base Unit (J9C2168 / VPLRS0388) or Seat Integrated Click and Go Base System.
  • The Click and Play Tablet Holder is not compatible with the Jaguar Land Rover Sports Seat.
Jaguar Part Information Land Rover Part Information
Click and Play Tablet Holder - T4K17568 Click and Play Tablet Holder - VPLKE0061
Click and Play Protective Case iPad 5+6 9.7" - T4K17569 Click and Play Protective Case iPad 5+6 9.7" - VPLKE0062
Click and Play Protective Case iPad Air - T4K17570 Click and Play Protective Case iPad Air - VPLKE0063
Click and Play Protective Case iPad Pro 9.7" - T4K17571 Click and Play Protective Case iPad Pro 9.7" - VPLKE0064
Fitting Instruction
1

Press the button on the top of the Click and Play Tablet Holder (A) to expand the arm for the desired tablet size.

2

Follow the instructions provided with the protective film (C) and apply to the device. Install the device into the tablet holder by inserting the lower edge first and then pushing the top edge into the housing.

3

Align slots on the tablet safety case (B) to the bottom tablet holder fixing and lift into the upright position.

4

Close the top tablet holder arm to secure the tablet protective case to the Click and Play Tablet Holder.

5

Push the tablet holder firmly into position. A click should be heard when secure.

6
NOTE
  • For vehicles with powered/manual adjustable headrest that can be moved up/down/forwards/rearwards. Adjust the headrest into a forward position so that the Click and Play Tablet Holder is easily engaged as shown.

Push the tablet holder firmly into position. A click should be heard when secure.

7
NOTE
  • For vehicles with powered/manual adjustable headrest that can be moved up/down/forwards/rearwards the headrest position may impact the range of tilt available.

Position the Click and Play Tablet Holder as required. The Click and Play Tablet Holder can be rotated and tilted.

8

Remove the Click and Play Tablet Holder by depressing the two buttons on each side as shown.

9

To remove the tablet and protective case from the Click and Play Tablet Holder raise and hold the lip on the top of the Click and Play Tablet Holder to release.

© Land Rover 2016