LAND ROVER

DEFENDER

WARNING

Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.

Accessories	Part Number	Superseded by	Superseded by
Spare Wheel Cover (Ceres Silver)	VPLEW0130	VPLEW0143	VPLEW0156
Spare Wheel Cover (Narvik Black)	VPLEW0157

CAUTION

The vehicle manufacturer recommends the use of specialised satin paint products when cleaning the spare wheel cover. Any other cleaning or paint protection product may have an adverse effect on the paint finish.
Never polish accessories that have a satin matte paint finish. Polishing causes the finish to shine and may reduce the matte effect.
Do not use an automated car wash. Using unapproved cleaning equipment can cause damage to the spare wheel cover.
Do not affix stickers, films, magnetic plates, or similar items to the spare wheel cover. Any such objects may damage the paint finish.
Additional care is required when cleaning accessories with a satin matte paint finish. It is recommended to wash accessories by hand, using a soft sponge, and making sure not to apply high pressure to the paint surface. Avoid washing accessories in direct sunlight. Remove any of the following substances immediately, where possible: insect remains, bird droppings, fingerprints, tree resin, oils, grease and fuels, wax and tar spots.

NOTE

This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.

NOTE

This step only applies to wheel cover part numbers (VPLEW0130 and VPLEW0143).

Observing the spare wheel cover orientation, offer up the spare wheel cover to the spare wheel.

NOTE

This step only applies to wheel cover part numbers (VPLEW0156 and VPLEW0157).

Offer up the spare wheel cover to the spare wheel making sure the two locators insert into the wheel nut recesses.

Make sure the spare wheel cover is lined up correctly before installing, as illustrated.

Pull the outer cover over the spare wheel.

Make sure the spare wheel cover is securely installed over the rear of the spare wheel and the outer cover is firmly tucked behind the spare wheel.

Remove the part of the outer cover that is tucked behind the spare wheel.

Pull the spare wheel cover away from the spare wheel.