• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DEFENDER

SEAT BACKPACK

VPLES0573

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to ordering and installation to make sure this accessory is applicable to your variant of vehicle. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
Kits Required Part Number
Seat Backpack VPLES0573
Fitting Instruction
1
WARNING
  • Do not exceed the 7.5kg storage weight limit when the backpack is strapped to the vehicle.

Place the seat backpack in the middle of the second row seats, with the backpack handle facing the back of the seat.

2
WARNING
  • When using the seat backpack on the second row seats the seat backpack must be strapped to the engaged second row centre seatbelt.

Feed the middle seatbelt through the backpack handle and click seatbelt buckle into place. Then push the backpack back onto the seat as far as it will go.

3

Unzip the front panel to reveal the main compartment.

4

Partially unzip the front panel to use the cup holder section. Tuck the top of the front panel behind the cup holder section.

5

When using the seat backpack outside of the vehicle then follow steps.

  1. Unzip the top rear section and pull out the shoulder straps.
  2. Unclip the rear strap and clip each shoulder strap to the adjacent part of the rear strap.
6

To adjust the straps pull on the part of the strap as illustrated.

© Land Rover 2016