SELECT YOUR LANGUAGE
Raise the centre armrest.
Remove the cover and put it into the glovebox.
Remove the ashtray.
Using a suitable tool remove the front portable media interface panel and disconnect the 3 electrical connectors.
Remove the floor console upper panel.
Drill a pilot hole into the cup holder as illustrated.
Drill a hole into the cup holder as illustrated.
Position the dock station harness to the cup holder and secure the grommet to the hole.
Install the pad (B) onto the docking station.
Install the docking station (A) to the cup holder.
Cut out the section of the floor console shown.
Install the floor console upper panel.
Secure the docking station harness as illustrated.
Connect the 3 electrical connectors and install the front portable media interface panel.
Plug in the docking station connector to front portable media interface panel.
Lower the armrest.
Install the ashtray.
Check the operation of the docking station.