SEARCH
LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

LAND ROVER

DISCOVERY

LOADSPACE PARTITION DIVIDER

VPLRS0376

FITTING INSTRUCTION

WARNING

Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.

NOTE

The loadspace partition divider requires either the full height loadspace partition or the half height loadspace partition to be installed.

1

Open the tailgate.

2

CAUTION

Make sure to protect the paintwork and vehicle trim.

Position the loadspace partition divider 'A' into the vehicle.

3

If the half height loadspace partition is installed then complete steps 4 to 5 before proceeding to step 8.
If the full height loadspace partition is installed then complete steps 6 to 7 before proceeding to step 8.

4

Move the partition divider to the required position.

5

Secure the partition divider to the half height loadspace partition with the wing-bolts 'B' provided.

6

Move the partition divider to the required position.

7

Secure the partition divider to the full height loadspace partition with the wing-bolts 'B' provided.

8

Before proceeding to the next step, check the loadspace partition and all fasteners for a safe and correct fit.

9

Close the tailgate.

10

CAUTION

After covering the illustrated distances, check the security of all fastenings.