LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DISCOVERY

TREADPLATES

VPLRS0368

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
CAUTION
  • If protective wax has been applied to the vehicle it must be thoroughly removed before starting this procedure.
  • The vehicle must be clean, dry and at workshop temperature. Vehicles moved into the workshop from cold or wet conditions should be dried and left to stand for a minimum of 2 hours.
NOTE
  • Left side shown. Right side is similar.
Fitting Instruction
1

Open the front left door.

2

Clean and dry the highlighted area.

3

  1. Position treadplate, (A), in the illustrated position.
  2. Using suitable tape, mark the position.
  3. Remove the treadplate.
4

Remove the adhesive film from treadplate (A).

5

  1. Install the treadplate to the previously marked position.
  2. Apply pressure to the treadplate for a minimum of 10 seconds.
6

Remove and discard the marking tape.

7

Remove the protective film from the treadplate.

8

Close the front left door.

© Land Rover 2016