SELECT YOUR LANGUAGE
Remove the load space floor panel.
Remove the rear bumper.For additional information, please refer to the official Workshop Manual. Rear Bumper (501-19 Bumpers)
Remove and discard the armature. For additional information, please refer to the official Workshop Manual. Rear Armature (501-19 Bumpers)
With the aid of another person, install the detachable towbar.
Install the bolts.
Install the bolt.
Torque the bolts up.
Connect the towbar electrics.
Using Jaguar Land Rover approved diagnostic equipment, configure the towbar electrics.
Install the exhaust heat sheilds, exhaust and rear bumper support bracket. For additional information, please refer to the official Workshop Manual. Rear Armature (501-19 Bumpers)
Reference the inside of the bumper skin for cut guide lines.
Using a suitable tool, cut the rear bumper as illustrated.
Install the toweye cover.
Install the rear bumper.For additional information, please refer to the official Workshop Manual. Rear Bumper (501-19 Bumpers)
Install item 'H'.
Remove the towbar receiver cap and store in item 'H'.
When the towball assembly 'D' is in use remove the cap 'E' before use.
Insert the towball 'D' into the towbar receiver unit.
To lock and unlock the towball refer to illustration.
Make sure the towball is secure.
Replace cap 'E' after removing the towball.
Store the towball assembly and keys in the storage box.