SEARCH
LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

LAND ROVER

DISCOVERY

SMOKER'S PACK

VPLRS0365

FITTING INSTRUCTION

WARNING

Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Whilst fitting, comply with instructions at all times. If in doubt, contact your nearest approved retailer.

1

Remove the power supply cover.

2

Using the tool supplied, release the clips and remove the power supply socket.

Insert the tool into the power socket locating the head of the tool into one of the slots as illustrated.
Rotate the tool in line with the power socket locating the tool into the slot of the socket.
Pull out the power socket.

3

Disconnect the electrical connector.

4

NOTE

Make sure the electrical wiring harness does not fall back into the trim panel.

Using a suitable, plastic, trim tool, remove the trim.

5

NOTE

Make sure the electrical wiring harness does not fall back into the trim panel.

Install the cigar lighter trim.

6

Connect the electrical connector to the cigar lighter.

7

NOTE

The cigar lighter has a location tag and will only fit one way.

Install the cigar lighter.

8

Push the cigar lighter into the trim.

9

Slide open the console cover.

10

Install the ashtray.