• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DISCOVERY

CLICK & GO SYSTEM BASE UNIT

VPLRS0388

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
  • Head restraints are designed to support the head, not the back of the neck. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision or sudden stop. While stationary, adjust the head restraint so that the top of the head restraint is the same height as the top of the seat occupant's head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the event of a collision.
  • Never adjust the head restraints while the vehicle is in motion.
Fitting Instruction
1

Raise the head restraint. Please refer to the Owner's Handbook.

2

Position the base unit.

3

  1. Depress the button.
  2. Compress the base unit.
  3. Position the base unit.
4

  1. Extend the base unit.
  2. Push the base unit down as illustrated.
5

Position the retaining clips.

6

Secure the base unit.

REMOVAL INSTRUCTIONS
1

  1. Insert the retaining clip removal tool.
  2. Remove the retaining clips.
2

  1. Depress the button.
  2. Compress the base unit.
3

Remove the base unit.

© Land Rover 2016