• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER

FIRE EXTINGUISHER

LR174241 / LR030371 / LR171035 / LR165914 / LR097680

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Please read the instructions carefully prior to installation. Comply with the instructions at all times. If in doubt, contact your nearest approved retailer.
CAUTION
  • Fire extinguisher is not compatible with vehicles that have rubber mats installed.
Accessory Part Number
Fire Extinguisher LR174241 / LR030371 / LR171035 / LR165914 / LR097680

Fire Extinguisher (Bill of Materials)

Bill of Materials Replacement Part Number
(A) Fire Extinguisher Bracket LR174241
(A1) Bolt M6x25 - x2 LR030371
(A2) Rivet Nut - x2 LR171035
(B) Fire Extinguisher Cradle LR165914
(C) Fire Extinguisher LR097680

Tooling

Tooling
Rivet Hammer
Rivet forming tool
Knife
10mm socket and wrench
REMOVAL INSTRUCTIONS
1

Position front passenger seat fully rearward.

2

Remove x2 floor clips.

3

Unclip seat harness and pull up the seat cover from its x4 clips.

Fitting Instruction
1
WARNING
  • Take care when handling knives.
CAUTION
  • Do not cut past the curve towards the front of the carpet.

Mark and cut carpet down the lines illustrated.

2

Fold cut carpet forward.

3

Install x2 rivet nuts (A2) into the holes illustrated with a rivet hammer and rivet forming tool.

4

Clip fire extinguisher bracket (A) to the fire extinguisher cradle (B).

  1. Locate the bracket to the x2 cradle locating tabs.
  2. Then pull the cradle down to lock it into place.
5

Fold back the carpet to the original position.

6

Attach the extinguisher bracket and cradle to the vehicle with x2 fixings (A1).

  • Torque: 10Nm
7

Install seat cover and harness.

8

Install fire extinguisher (C) to the cradle with the strap provided.

9

Adjust seat back to a suitable position.

© Land Rover 2016