LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER

LOADSPACE RETENTION NET

VPLKS0613

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Please read the instructions carefully prior to installation. Comply with the instructions at all times. If in doubt, contact your nearest approved retailer.

Loadspace Retention Net (Bill Of Materials)

NOTE
  • Inspect contents of kit to make sure all parts are correct.
Bill Of Materials Service Part Number
(A) Loadspace Retention Net (5 Seat and 5 Seat Executive) VPLKS0613
REMOVAL INSTRUCTIONS
1

Open upper and lower tailgates.

2

Remove or recline parcel shelf. For vehicles with power parcel shelf please refer to Owner's Handbook.

Fitting Instruction
1

Raise x4 D-loop anchor points.

2
NOTE
  • Make sure the brand label is on the right when fitting retention net and is visible.

Fit retention net (A) to x4 D-loops and then check net for correct installation.

3

Install or recline back the parcel shelf. For vehicles with power parcel shelf please refer to Owner's Handbook.

4

Close upper and lower tailgates.

© Land Rover 2016