• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DISCOVERY

CLICK & PLAY TABLET HOLDER - IPAD 2-4

VPLRS0391

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
CAUTION
  • Take suitable care not to damage the Click & Play Tablet Holder if the rear seats are folded down.
  • A protective film must be fitted to the tablet before installing it to the Click & Play Tablet Holder.
  • When not in use the Click & Play Tablet Holder should be stored in the luggage compartment.
NOTE
  • The Click & Play Tablet Holder is to be used with the Click & Go System Base Unit.
Fitting Instruction
1
NOTE
  • The tablet holder should be fitted with the button facing the right side of the vehicle as illustrated.

Push the tablet holder fully into position.

2

  1. Position the tablet.
  2. Raise the retaining clip.
  3. Lock the tablet into position.
3

Depress the button to pivot the tablet forwards and backwards.

4

Rotate the tablet if necessary.

5

Depress the button to pivot the arm as necessary.

REMOVAL INSTRUCTIONS
1

  1. Raise the retaining clip.
  2. Move the tablet as illustrated.
  3. Remove the tablet.
2

  1. Depress the buttons.
  2. Remove the tablet holder.
© Land Rover 2016