LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER VELAR

RUBBER MATS

VPLYS0413 / VPLYS0414 / VPLYS0636

FITTING INSTRUCTION

WARNING
  • Accessories which are not properly fitted can be dangerous. Read the instructions carefully prior to fitting. When fitting, comply with instructions at all times. If in doubt, contact your nearest approved retailer.
NOTE
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
Description Part Number
Rubber Mats - Ebony - Left Hand Drive (LHD) VPLYS0413
Rubber Mats - Ebony - Left Hand Drive (RHD) VPLYS0414
High Sided Mats - China Market VPLYS0636
NOTE
  • Do not place the rubber mats over the top of any other carpet mats or rubber mats. The floor pegs will not be able to secure the rubber mats to the vehicle floor. There is a risk of the rubber mats slipping.
Fitting Instruction
1
NOTE
  • Left hand drive (LHD) 'Rubber Mats' are shown in all the following illustrations. Right hand drive (RHD) 'Rubber Mats' are similar.

Secure the rubber mat to the vehicle floor in the driver footwell, using the two carpet floor pegs, as illustrated.

2

Secure the rubber mat to the vehicle floor in the front passenger footwell, using the two carpet floor pegs, as illustrated.

3

Secure the rubber mat to the vehicle floor in the rear right passenger footwell, using the two carpet floor pegs, as illustrated.

4

Secure the rubber mat to the vehicle floor in the rear left passenger footwell, using the two carpet floor pegs, as illustrated.

© Land Rover 2016