LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

DEFENDER

CLICK & WORK FOLDING TABLE

VPLRS0395

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
  • The click & work folding table does not restrain items placed on it.
  • Items may come lose if the vehicle abruptly changes direction and may cause injury to the vehicle occupants.
  • If the click & work folding table is open while the vehicle is being driven sudden changes of direction or heavy braking could cause harm to the vehicle occupants. Close the table and the support bracket before every journey.
CAUTION
  • Take suitable care not to damage the click & work folding table if the second row seats are folded down.
  • When not in use the click & work folding table should be stored in the loadspace.
  • If your vehicle seats are equipped with an integrated seat backrest base unit as illustrated, you do not need the click & go system base unit, item VPLRS0388.
Fitting Instruction
1

Lift the installation clip.

2

If your vehicle seats are equipped with an integrated seat backrest base unit, raise and hold open the flap while installing the click & work folding table.

3

Push the table fully into position.

4

 

  1. Push the retaining clip.
  2. Lower the table.
5

 

  1. Depress the height adjustment button.
  2. Adjust the height of the table as required.
  3. Depress the table support button.
  4. Adust the table support arm as required.
6

Lower the cup holder if necessary.

7
CAUTION
  • Do not exceed 3 Kg on the table surface. If the load is exceeded the table surface may fold down, in this state lift the table surface until it clicks into position.

 

REMOVAL INSTRUCTIONS
1

Removing the click & work folding table from the base unit.

  1. Depress the buttons.
  2. Pull out the table.
© Land Rover 2016