SEARCH
LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

LAND ROVER

DEFENDER

FOLDABLE PET CARRIER

VPLCS0520

FITTING INSTRUCTION

WARNING

Accessories which are not properly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.
Make sure the foldable pet carrier is secure before use.

NOTE

To clean the foldable pet carrier, wipe down with a clean damp cloth.

1

Unclip the 2 buckles either side of the foldable pet carrier and unfold as shown.

2

Clip the 2 support bars together as shown.

3

NOTE

The foldable pet carrier can be positioned both longitudinally and transversely. This is detailed in later steps.

To use longitudinally, place the foldable pet carrier in the loadspace as shown.

4

CAUTION

Make sure the straps are tight by pulling the strap as shown.

Attach the front foldable pet carrier strap to the loadspace D-loop.

5

Lower the second row seat to access the foldable pet carrier rear strap.

6

CAUTION

Make sure the straps are tight by pulling the strap as shown.

Attach the rear foldable pet carrier strap to the loadspace D-loop anchor points.

7

Raise the second row seat.

8

The front and side doors of the foldable pet carrier can be opened by un-zipping and rolling the flap up and securing with the velcro tabs as shown.

9

To use transversely, place the foldable pet carrier in the loadspace as shown.

10

Lower the second row seats to access the foldable pet carrier rear straps.

11

CAUTION

Make sure the straps are tight by pulling the strap as shown.

Attach the foldable pet carrier straps to the loadspace D-loop anchor points.

12

Raise the second row seats.

13

To remove the foldable pet carrier loosen the straps as shown and reverse the install procedure.