SEARCH
LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

LAND ROVER

RANGE ROVER EVOQUE

BATTERY CONDITIONER

VPLVV0077, VPLVV0078, VPLVV0079

FITTING INSTRUCTION

WARNING

Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.

1

2

3

4

5

Install part (A).

Install parts (B)
Install parts (C)

6

7

8

9

Feed the positive cable of harness (D) through into the battery box compartment as shown.

10

Connect the positive lead of (D) to the positive battery terminal.

11

Connect the negative lead of harness (D) to the negative battery terminal.

12

CAUTION

Make sure all of harness (D) is within the battery box cover housing.

Securely position the fuse on harness (D) between the battery box and battery box cover housing as shown.

13

Connect harness (A) and (D).

14

CAUTION

Make sure all parts of the harness are securely fastened.
Make sure harness (A) is not entangled with harness (D) and has slack in its length.

NOTE

Insulation tape is recommended.

Secure harness (D) to the negative battery cable. Use cable ties provided.

15

16

WARNING

When charging, make sure the charging lead is clear of the hood latch area and not trapped if the hood is closed.