SELECT YOUR LANGUAGE
Open the tailgate.
Remove the roller blind
Lower the second row seats. Refer to handbook for operation.
Place the Quilted loadspace liner base (A) into the loadspace. Align the front edge of the liner with the front edge of loadspace carpet.
Raise the Quilted loadspace liner base sides and rear flap. Loop the elastic over the interior trim hooks as shown.
If left side vents are present the panel arrowed should be removed.
Fold the Quilted loadspace liner base rear side flaps inwards.
Raise the rear panel ensuring the velcro strips line up with the flaps and attach the velcro.
Raise the second row seats. Refer to handbook for operation.
Loop the elastic strap around the metal headrest pillars. Clip to the housing on the rear panel.
Align and slide the front panel (B) flap under the quilted loadspace liner base. Line up the velcro and attach the front panel flap to the underside of the quilted loadspace liner base.
Lift the front panel and secure using the buckles on both sides of the rear panel.
If the vehicle is equipped with a inner tailgate panel proceed with the following steps.
Remove both of the snap buckles.
Raise the inner tailgate panel.
Loop the quilted loadspace front panel elastic bands over the inner tailgate panel.
