• SEARCH
  • LANGUAGE - English

LAND ROVER ACCESSORY FITTING INSTRUCTIONS

VEHICLE :
PART NO :
KEYWORD :

LAND ROVER

RANGE ROVER

ROOF BOX

VPLZR0191

FITTING INSTRUCTION

WARNING
  • Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to ordering and installation to make sure this accessory is applicable to your variant of vehicle. Comply with instructions at all times. If in doubt, contact your nearest approved retailer.

Roof Box (bill of materials)

Description Part Number
Land Rover Roof Box VPLZR0191
Jaguar Roof Box C2Z32603

Warnings / Cautions / Notes

WARNING
  • Do not exceed 130 km/h (80 mph).
  • The roof box can carry up to 75kg, but this may be limited by the roof-carrying capacity of your vehicle. Refer to the vehicle's Owner's Handbook to find the roof-carrying capacity of your vehicle (Max available roof box load = vehicle roof carrying capacity - weight of roof box - weight of cross bars). This calculation assumes no additional roof-carrying accessories are installed to the cross bars.
  • Be aware of the extra vehicle height.
  • The roof box is not suitable for carrying building materials, loose materials, flammable, explosive or corrosive substances, pets and livestock, or sharp implements.
  • Make sure body parts are not trapped by the lid when loading.
  • Make sure the load is secured within the roof box using retention straps before starting a trip.
  • Remove the roof cross bars and roof box before using an automatic vehicle wash.
  • Adapt your driving technique to suit changes in vehicle handling.

Your Key Number:=

NOTE
  • The locking system used on this accessory is compatible with the Thule key system. Take note of your key number (you may use the field below) in case a replacement is required. To order replacement keys, refer to your local Thule retailer/website and quote your key model number. For this accessory, the key model number begins with 1500002***, so for example, the model number for key number N123 would be 1500002123.
Fitting Instruction
1

Make sure your vehicle cross bars are a suitable size and distance.

2
NOTE
  • The roof box can be opened from both the left or right side.

Open the roof box.

  1. Insert key (D) into key hole and turn clockwise to the unlock position.
  2. Slide the switch to the left until a click is heard to release the roof box lid from its x3 latches.
  3. Open the roof box lid (A).
3
CAUTION
  • This step requires the assistance of another person.

Lower roof box onto the vehicle cross bars. Adjust the position of each bracket by sliding them to align with your cross bars as illustrated.

4

Align roof box correctly (straight) as illustrated, while keeping clearance for tailgate to fully open.

5

Make sure that the x4 clamps (C) are open fully before installation. If not then turn the handle counter clockwise to open clamps.

6

Install the x4 clamps (C) into the roof box positioned above the cross bars. A clicking sound is heard when installed correctly.

7

Secure the roof box to the cross bars by rotating x4 clamps clockwise until a clicking sound is heard.

8

Feed straps (B) through brackets as shown. Only use as many as required.

9

Load the roof box with the weight evenly distributed. Then secure with straps (B).

10

Close and lock the roof box.

  1. Close the roof box lid (A). A click will be heard when each of the x3 latches (highlighted by arrows) are secured. You may need to press the lid down at each latch position until three clicks are heard.
  2. When securely closed the sliding switch will return to position illustrated.
  3. Turn key (D) counter clockwise to lock roof box and remove key.
11
CAUTION
  • The roof box clamps must be checked at regular intervals.

After every 100 km or 60 miles, inspect and if necessary tighten all clamps.

© Land Rover 2016